Today I will talk about the processing technology of graphite products:
Cutting according to the dimensions of drawings; normally, minor factories use portable cutting saw; large factories use bridge type cutting machine or horizontal cutting machine. Cutting must has certain experience. You could not cutting at the corner, which results to badd effect.
Trimming: as we know already, the material opened by cutting must have many uneven places. In order to adhere to smooth, we need to repair the burrs.
Bonding
Prepare the material need to be bonded
Adjust specific glue; add suitable curing agent to mix evenly
Use clamp to fasten material; pay attention to the direction of clamp
Polishing
Differed from jade, artifical table-board do not need to be professional and precision polishing. But it still needs to further-processing. Table-board bonding formed already could use angle grinder to repair, then it could be polished. There are many ways for polishing.
Installation
The installation of artifical table-board has many kinds. Due to its different applications, it could be used as table-board for kitchen cabinet, bay window, toilet, etc. General steps are as follows:
Adjust the flatness of cabinet
Place the base plate
Place the table-board made already
Bonding
Polishing
Clean the site
