A variety of carbon and graphite products have been formed after the formation of a certain size and shape, however, after the molding of the raw products after roasting and graphitization has a certain degree of deformation or bending, touch or drop angle, the surface also stained with some fillers or insulation. Material and appear rough and uneven, not through a certain method of mechanical processing can not be used.
For example, the electrodes used in the smelting of electric furnaces need to be threaded holes for the joints used for continuous use at both ends of the product, and special machining of threaded connectors for two electrodes; some products require the drawings to be processed into special shapes and specifications and to achieve the required surface finish. Therefore, different types of products have different mechanical processing requirements.
Processing content of different varieties of products
1. Electric furnace smelting electrode processing content including product surface car (also known as “pull out”), to eliminate the slight bending-deformation, surface damage and other defects, both ends tangent and in accordance with the specified size boring and machining in the hole in the thread, in addition to the special production of joint blanks processing joints.
2. The graphite anode of the salt electrolysis industry has a round rod, a square or rectangular rod or a plate, which must be machined. Round rods need to be on the lathe “pull the shortage”, and according to the specified length cut, square and rectangular anode used before the four-sided planing light, but at present the anode four-sided planer most of the use of the factory itself, the production plant will only be the anode at both ends of the specified length.
