Graphite plate is widely used in metallurgy, chemical industry, electrochemistry and other industries because of its good conductivity, high temperature resistance, acid resistance, alkali corrosion resistance and easy processing. The types of graphite plates are anode graphite plate, high purity graphite plate, conductive graphite plate, flexible graphite plate, high temperature graphite plate, etc.   High

Graphite plate is widely used in metallurgy, chemical industry, electrochemistry and other industries because of its good conductivity, high temperature resistance, acid resistance, alkali corrosion resistance and easy processing. The types of graphite plates are anode graphite plate, high purity graphite plate, conductive graphite plate, flexible graphite plate, high temperature graphite plate, etc.   High

Recently, the large area carbon electrode perovskite solar cell developed by Kunshan Innovation Research Institute of Nanjing University has completed the STC power test in the international authoritative third-party certification agency t Ü V Rhine of Germany, and obtained the test report. Among them, the conversion efficiency of 30cm * 45cm solar cell (effective area

(1) For EAF Electric furnace steelmaking is a big user of graphite electrode. In China, the output of EAF steel accounts for about 18% of the output of crude steel, and the consumption of graphite electrode for steelmaking accounts for 70% ~ 80% of the total consumption of graphite electrode. Electric furnace steelmaking is to use the graphite

Many factors have been shown to influence the behaviorof the SEI on a natural graphite anode. The nature of thecarbon and the composition of the electrolyte are the mostimportant and the most studied. The electrolyte com-position will affect the amount of solvent co -intercalation that will precede or accompany the formation of the pas-sivating layer on

The structural characteristics of samples were measured by XRD (X-ray diffraction), SEM (scanning electron microscope) and BET (Brunauer, Emmett and Taylor) techniques. The results show separation of graphitic layers and a larger diameter size of graphitic grain. Constant current charging-discharging and cyclic voltammetry were carried out, indicating the improved high rate performance and cyclic stability